EE 456: Power System Analysis


EE 456: Power System Analysis I




Homework 1:











1. The electric current and voltage at one terminal of a single phase transmission line are:






141cos( 10 ),




390cos( 5 ),






I t A




V t V
























 




 














Compute the rms values of the electric current and voltage, the complex power, and the real and




reactive power flowing into the line.





2. Two single-phase ideal voltage sources are connected by a line of impedance of 0.7 j2.4


as shown in Fig. 1. V1 50016.26V and V2 585 0V. Plot   V1,V2 and I12 in a phasor







diagram. Also, find the real and reactive power loss in the line.




Fig. 1




3. A single-phase inductive load consisting of R and X in series feeding from a 2400-V rms




single-phase supply absorbs 288 kW at a lagging power factor of 0.8. Determine R and X.




4. The system shown in Fig. 2 is balanced. Assume that:






10 15





ca 208 120




























  




 





Find Vab ,Vbc ,Van ,Vbn ,Vcn , Ia , Ib and Ic







Fig. 2





5. A balanced delta-connected load consisting of a pure resistances of 18 per phase is in


parallel with a purely resistive balanced Y-connected load of 12per phase as shown in Fig. 3.







The combination is connected to a three-phase balanced supply of 346.41-V rms (line-to-line) via





a three-phase line having an inductive reactance of j3per phase. Taking the phase voltage Van







as reference, determine




(a) The magnitudes of current, real power, and reactive power drawn from the supply.





(b) The line-to-neutral and the line-to-line voltage magnitudes of phase a at the combined load











Fig. 3



Place Similar Order Now!

  • Our Support Staff are online 24/7
  • Our Writers are available 24/7
  • Most Urgent order is delivered with 6 Hrs
  • 100% Original Assignment Plagiarism report can be sent to you upon request.