Course Work 2

Course Work 2

Course Work 2

Submit a report which provides answers to Questions 5 and 6.

Learning Outcome 4.1
4.1: Recognise a variety of complex waveforms and explain how they are produced from sinusoidal waveforms

1) Construct the circuit shown below in Multisim (or something similar) and connect an oscilloscope across the resistor. Using 100V and 50Hz for the fundamental (phase angle of your choice), add two different harmonic sources to produce similar waveforms to those shown below, by altering the frequencies, magnitudes and phase angles of the AC voltage sources. In your assignment include a clear screen print of the two circuits and voltages simulated; state the frequency, magnitude and phase angles used in each case for all the voltage sources; and briefly explain how you arrived at those values.
Waveform A
Waveform B
Learning Outcomes 4.2 and 4.3
4.2: Apply AC theory to solve problems on R, L, C circuits and components
4.3: Apply AC theory to solve problems involving transformers

2) The circuit shown below is for a typical ELV fluorescent lamp fitting, which operates at 24V 50Hz. Assuming the fluorescent tube has an operating resistance of 39O and an ideal transformer, calculate:

a. the turns ratio

b. the current supplied by the source

c. the impedance seen at the supply (HV side)

d. the power dissipated by the tube

e. the operating power factor of the fitting

Place Similar Order Now!

• Our Support Staff are online 24/7
• Our Writers are available 24/7
• Most Urgent order is delivered with 6 Hrs
• 100% Original Assignment Plagiarism report can be sent to you upon request.
[order_calculator]