FF to 00.
0000 to FFFF.
FFFF to 0000.
3FFF to 0000.
The frequency of the signal can be determined.
The duty cycle of the signal can be calculated.
The period of the signal can be calculated.
The pulse width of the signal can be determined.
|Question 4. 4. (TCO 3) A PWM is to be programmed to output a signal with a pulse high width of 150 usec and a pulse low width of 250 usec. What are the values required for prescale (if any) PWMPER and PWMDTY? An 8-bit configuration is used and the E-clock is 24 MHz. (Points : 10)|